HPI #545

No engine included so you can pick your own
Engine mounts, manifold and dual chamber tuned pipe included to get you going quickly
Same tough drivetrain and suspension as the Nitro MT
Thicker chassis for more durability
Tuned shock springs
Pro-Line Bow Tie "T" tires and trick black wheels included
Stainless steel hinge pins for extra suspension durability
MIP Shiny CVDs included
Slipper Clutch included
Fiber Brake Disk included
Nitro Racing Clutch included
Racing fuel tank included
Clear, unpainted body included
All this at about the same price as the Nitro MT kit!

980.00

Length	420mm or 16"	(total length, wheels/tires and body included)
Weight	~ 2.1kg or 4.6 lbs	(with electronics, approximate)
Front Width	304mm or 12"	(Measured at outside of tires)
Rear Width	316mm or 12 3/8"	(Measured at outside of tires)
Wheelbase	277.5mm or 10 7/8"	(short)
	294mm or 11 11/16"	(standard)
Fr. Shock Length	87mm maximum	50 wt shock oil included
Fr. Shock Stroke	62mm
Rr. Shock Length	103mm maximum	50 wt shock oil included
Rr. Shock Stroke	70mm
Front Wheels	2.2" MT Mesh Wheels, with hex adapter	(see note)
Rear Wheels	2.2" MT Mesh Wheels, with hex adapter
Front Tires	2.2" Bow Tie tire
Rear Tires	2.2" Bow Tie tire
Front Caster	18 degrees (8 degrees kick-up in chassis, plus 10 degrees in front uprights)
Caster/Front Toe	Fixed plastic links
Rear Toe	2 degrees toe-in
Gear Pitch	1M (metric)
Gear Ratio	52T spur and 12T pinion
Differential Type	Metal Bevel Gear
Chassis Type	2.5mm Purple Anodized Aluminum
Engine Mounts	Included; 20mm height for pullstart engines
Carb Linkage	Included; for slide carb engines #A889 set required
Pipe and Header	Included	plastic 2-chamber pipe and header for side-exhaust engines

NITRO RS4 MT RACER KIT