Double-X4WD World's Limited Edition
Kit(LOSA0011)
World Champion XX-4 Makes a Comeback
- Slotted
Graphite Chassis
- Graphite
Shock Towers
- Titanium
Nitrided Shock Shafts
- Heavy
Duty Green and Blue Belts
- Aluminum
Rear Pin Brace
- Lowered/Offset
Motor Plate
- Taper
Pin Front & Rear tires
- "HW"
Body w/Cooling Scoops
- Graphite
Suspension Arms
- Threaded
Shock Bodies
- Ball
Bearing Steering
- Aluminum
Wheel Nuts
- 3
Degree Toe-In Rear Pivots
- Titanium
Turnbuckles
- Axle
Bearing Spacers
- New "Solid" Front Wheels
|
|
|
|
|
|
Overview
The words “by popular demand?are often over used but in the case of Team Losi’s
XX-4
World Champion off-road buggy truer words were never spoken. Team Losi has
recognized
that in some rare and extreme cases where the track surface is badly rutted and
“blown out?
the remarkable suspension package of the XX-4 still offers a competitive edge.
So by popular
demand it is being re-released as a “Limited Edition?graphite kit. Racing is
always evolving
and as tracks around the world have changed so has chassis design. The XX-4
four-wheel
drive buggy ruled the raceways around the world for years but as the trend in
tracks moved
to smoother, well-groomed surfaces the XXX-4 was developed to take advantage of
the new
breed of motor and batteries. In 2005 major events were run on rough rutted
tracks and the
XX-4 ruled again winning both the European Championships as well as the last
two rounds of
the prestigious UK 4WD championship along with the 2005 BRCA Junior and
Regional
Championships. Needless to say, racers want it so Team Losi will make it
available as before.
All the same graphite, titanium and machined aluminum parts are included to
build the World
Champion rough track wonder. All parts have been and will remain available as
well.
Product Specifications
Type: 4WD Competition Off-Road Buggy
Scale: 1/10
Length: 15.5 in (394mm)
Width: 9.625 in (244mm)
Wheelbase: 10.5 in (266mm)
Weight: varies with equipment used
Chassis: Team Losi Graphite Composite
Suspension: 4-Wheel Independent
Drive Train: Triple-Belt 4WD, fully enclosed, Front & Rear Diffs
Tire Type: Team Losi Taper Pins (Red compound)
Gear Pitch: 48
Wheel Size: 2.2 in
Kit/RTR: Kit
Shock Type: Hard-anodized, threaded bodies w/Ti-Ni shafts
Body: Clear polycarbonate with wing
Ball Bearings: Complete
Needed to complete
6-cell saddle battery pack
2
channel surface radio w/steering servo
Electronic
speed control
Motor
w/pinion gear
Modeling
tools
Paint for polycarbonate bodies